Follow
Subscribe
Credence Filling Systems
Fill it Right the First Time
Our Machines
-
![Cartridge Filling Machines]()
Cartridge Filling Machines
Button -
![]()
-
![]()
Leading the Way
Credence is a family-owned and operated company out of Tempe, Arizona with over 25 years of Engineering expertise. Our innovative team prides itself on designing and manufacturing the most efficient cartridge filling and capping systems to meet our customers' needs.
No Oil Is Too Tough for Us to Put in a Cartridge.
The Credence Filling System is a true volumetric cartridge filling system designed specifically for high viscosity extracts and distillates. No oil is too hard for our cartridge filling machines put into a cartridge!
Dedicated to Complete Customer Focus
- Instant Access to Service Personnel
- Full Stock of Machines and Parts
- Creative Solutions to Manufacturing Problems
Meeting the Needs of a Rapidly Evolving Industry
- Low-Cost Upgrades
- Design-Based Solutions
- Fast Turn-Around
Continuous Improvement of Existing Products
- Modular Designs for Easy Upgrades
- Game-Changing Innovation
- Scalable Designs
Breakthrough Product Development
- Free Development of Process Components for Full Utilization
- Design Tools for New Products
- Spare Machines & Tools for Periods of High Volume
- Free Consulting
The Best of the Best
Credence Filling Systems has developed a sophisticated product line. Our machines are user-friendly, accurate, allow for repeatable filling, and achieve precision fill weights.
Using a needle to inject concentrate into a pre-roll, it is necessary to keep the concentrate at the optimum temperature so that it can flow freely through the delivery system, and ultimately through the needle for accurate placement of the concentrate within the pre-roll. Some concentrates have the tendency to freeze or nearly freeze up in the needle because the needle is exposed to the room environment, which could be cooler than expected, especially during the hot months of summer. At Credence, we continually look for issues like this and come up with ways to prevent them from causing lost product or downtime. The PRI-600 pre-roll infusion machine has a 4” long needle and is therefore prone to allow the concentrate inside to freeze if there is a long delay between pre-roll infusions. To alleviate this problem, we attached our patented needle heater to a spring-loaded beam that holds the needle down at the needle tip just above the needle port holes. As the pre-roll is raised by the system elevator, it makes contact with the bottom surface of the needle heater and pushes it upward as the needle enters. Heat is generated throughout the needle as it goes up and down on each cycle, keeping the internal concentrate liquid flowing smoothly. We added another software feature where, if there is a delay by a predefined time in infusing the next pre-roll, the elevator automatically raises slowly while a warning blinks on the screen. The elevator raises until the needle point is within the pre-roll fixture and then increases speed up and down until the operator presses the CLR (Clear) button to continue infusing. This keeps the concentrate in the needle at a liquid state while the operator is away and keeps the PRI-600 always ready to run production.
Rosin comes from an extraction process that uses heat and pressure to squeeze cannabis into a resinous sap. Unlike hydrocarbon extraction methods, it doesn’t use solvents such as butane to help extract the cannabinoids and terpenes. The major benefits of rosin are the result of not using solvents. First at the production level, there is not an extra step to remove the solvents. There is no need for extensive testing to make sure that all solvents have [...]
Introducing our newest addition to our product line: the CMS-3000 array attachment. The Credence Mobile Shot extends any of our filling machines so that you can easily fill cartridges packed in a foam array without unpacking and repacking. The extension line connects to the filling machine and is operated with a hand held grip. A push button at the top of the grip turns on the pump cycle. The grip also contains a needle heater inside for maintaining the proper temperature for the needle, which [...]
As your business grows and you’re capable of producing more oil, we are here to help you increase your productivity with our filling and capping machines. Here are two comparisons showing the difference that you can save over time using our machines rather than filling by hand.If you are producing 10,000 cartridges per month, here is a comparison to the CFS-1000M: #element-c9d112f2-66e0-4a73-99c9-357e8a9eeeae .simple-table-wrapper { padding: 20px 0;}#element-c9d112f2-66e0-4a73-99c9-357e [...]
Our commitment to you is only secondary to our commitment to our Lord and Savior Jesus Christ.